- Pre-tapped rack channel
- Standard E.I.A. rack spacing thoughout, with Pre-tapped 10/32 in. holes in zinc-plated steel channels
- Screws and gromments included
- Case inner shell is protected by 2 in. foam on all 4 sides
- Server racks may have rails with square holes
- For Dell and Compaq versa and rapid edge system racking
- 18 in. to 36 in. rack depth
- 2U to 30U rack height
- 19 in. standard rack width
- 23 in. telecommunications rack width available
- Caster boards extend out 3 in. under lids
- For added stability and ease of lid replacement
- 3/8 in. ATA outer wall – 3/8 in. ACK plywood laminated with ABS plastic – recommended for local use and 3 to 4 trips per year
- 3/8 in. Anvil iron outer wall – 1/4 in. ACK plywood laminated with high strength mica (polyolefin) plastic recommended for 5 to 6 trips per year
- 1/2 in. Anvil iron outer wall – 3/8 in. ACK plywood laminated with MICA (polyolefin) plastic recommended for 5 or more trips, large and/or deep rack cases / or whenever forklifts are often used
- Heavy duty wide track piano casters for easier transit over uneven surfaces like door jams and cables
|
Click to Enlarge
Anvil Shock Rack Case with Square Hole Rails for Computer Servers |
